HIGH PRESSURE TUBING

Hydratron high pressure tubing is seamless and cold drawn. It is manufactured to strict specifications and is supplied in 4-6 metre lengths. Heat should not be applied to the tubing for bending, brazing, welding etc, as this will destroy its physical properties.

Material: 316 SS

Minimum bend radius
1/4" O/D....40mm
3/8" O/D....60mm
9/16" O/D....100mm


High pressure connection details for Hydratron high pressure fittings






Standard distance pieces


O/D 1/4" I = 65mm....HN21M02
O/D 3/8" I = 75mm....HN31M03
O/D 9/16" I = 90mm....HN51M04


End finished tubing

All tubes can be supplied ready finished. The order number is the same as the Standard Distance Piece number, with the exception that behind the number, the required length in mm must be stated

e.g. HN21M02-275 = Tubing TU1/4HPSS length 275mm